Idioma:

Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding

Fomin, Fedor ; Froend, Martin ; Ventzke, Volker ; Alvarez, Pedro ; Bauer, Stefan ; Kashaev, Nikolai

International journal of advanced manufacturing technology, 2018-07, Vol.97 (5-8), p.2019-2031 [Periódico revisado por pares]

London: Springer London

Texto completo disponível

Citações Citado por

Enviar para

Título:
Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding
Autor: Fomin, Fedor ; Froend, Martin ; Ventzke, Volker ; Alvarez, Pedro ; Bauer, Stefan ; Kashaev, Nikolai
Assuntos: CAE) and Design ; Computer-Aided Engineering (CAD ; Constitution ; Cooling rate ; Dilution ; Engineering ; Heat treating ; Industrial and Production Engineering ; Laser beam welding ; Laser processing ; Lasers ; Martensite ; Martensitic transformations ; Mechanical Engineering ; Mechanical properties ; Media Management ; Metallurgy ; Microstructure ; Morphology ; Original Article ; Skin ; Tee joints ; Titanium alloys ; Titanium base alloys
É parte de: International journal of advanced manufacturing technology, 2018-07, Vol.97 (5-8), p.2019-2031
Descrição: The present paper focuses on the metallurgical and microstructural characterization of the laser beam-welded T-joints between commercially pure titanium (CP-Ti) and Ti-6Al-4V alloy. The weld regions were comprehensively studied and the mechanisms leading to the final morphology within each weld region were described. The link between microstructural features and local mechanical properties was demonstrated. Owing to different constitution, the responses of the two titanium alloys to thermal cycles imposed by laser welding are completely different. A strong interface with no dilution zone between the two alloys was observed. The cooling rate during the welding process is high enough for diffusionless martensitic transformation in the Ti-6Al-4V part of the fusion zone. In contrast, no evidence of martensite was found in the CP-Ti because of low solute content and, consequently, much higher critical cooling rate. Plausible reason for some controversy found in the literature on the resulting transformation products after laser processing of CP-Ti was given. The present findings might have important industrial implications because careful microstructural characterization revealed the real position of the skin fusion line, which is of great importance for fulfillment of the weld quality criteria. Graphical abstract ᅟ
Editor: London: Springer London
Idioma: Inglês

Voltar para lista de resultados

Realização: Logos de Redes Sociais:

Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding

Fomin, Fedor ; Froend, Martin ; Ventzke, Volker ; Alvarez, Pedro ; Bauer, Stefan ; Kashaev, Nikolai

London: Springer London

Buscando em bases de dados remotas. Favor aguardar.