Idioma:

Tailoring of Processing Parameters, Dendritic Microstructure, Si/Intermetallic Particles and Microhardness in As-cast and Heat-Treated Samples of Al7Si0.3Mg Alloy

Barbosa, Carolina R. ; Machado, Gabriel H. ; Azevedo, Hugo M. ; Rocha, Fernando S. ; Filho, José C. ; A. Pereira, Arielly ; Rocha, Otávio L.

Metals and Materials International, 2020, 26(3), , pp.370-383 [Periódico revisado por pares]

Seoul: The Korean Institute of Metals and Materials

Texto completo disponível

Citações Citado por

Enviar para

Título:
Tailoring of Processing Parameters, Dendritic Microstructure, Si/Intermetallic Particles and Microhardness in As-cast and Heat-Treated Samples of Al7Si0.3Mg Alloy
Autor: Barbosa, Carolina R. ; Machado, Gabriel H. ; Azevedo, Hugo M. ; Rocha, Fernando S. ; Filho, José C. ; A. Pereira, Arielly ; Rocha, Otávio L.
Assuntos: Aluminum base alloys ; Characterization and Evaluation of Materials ; Chemistry and Materials Science ; Cooling rate ; Dendritic structure ; Directional solidification ; Engineering Thermodynamics ; Heat and Mass Transfer ; Heat treating ; Ingot casting ; Intermetallic phases ; Machines ; Magnesium compounds ; Magnetic Materials ; Magnetism ; Manufacturing ; Materials Science ; Mathematical analysis ; Metal silicides ; Metallic Materials ; Microhardness ; Microstructure ; Process parameters ; Processes ; Qualitative analysis ; Quenching ; Silicon ; Solid Mechanics ; Solidification ; Solution heat treatment ; Spheroidizing ; Thermodynamic properties ; Time dependence ; Warm water ; 재료공학
É parte de: Metals and Materials International, 2020, 26(3), , pp.370-383
Descrição: In this work, solidification and T6-heat treatment experiments were performed with the Al7Si0.3Mg alloy in order to investigate the effect of processes parameters on the microstructure and microhardness (HV). A directional solidification device was used, and the solidification thermal parameters investigated were the growth and cooling rates (V L and T R ). The heat treatment applied was the T6 (T6-HT), under the following conditions: solution treatment for 3 h at 520 ± 2 °C, followed by quenching in warm water (70 ± 20 °C), aging for 1, 2, 3 and 4 h at 155 ± 2 °C and air-cooling. The microstructure observed in both as-cast and T6-heat treated samples is composed of a primary phase consisting of an Al-rich dendritic network and secondary eutectic phases, located within the interdendritic regions, formed by Si and Mg 2 Si particles and Fe-intermetallic phases. The dendritic microstructure was characterized by secondary dendritic spacing (λ 2 ) and, for both investigated samples, a single mathematical expression was proposed on the λ 2 dependence with the position in the ingot. Spheroidized-like eutectic Si particles have been found in both analyzed samples for finer microstructures. Elements quantitative and qualitative microanalysis by SEM/EDS as well as HV measurement at the dendritic and interdendritic regions attest to the effectiveness of the T6-heat treatment. It is highlighted in this work that mathematical expressions have been proposed to characterize the HV dependence on aging time. Graphical Abstract
Editor: Seoul: The Korean Institute of Metals and Materials
Idioma: Inglês

Links

Access content in National Research Foundation of Korea (NRF)

Voltar para lista de resultados

Realização: Logos de Redes Sociais:

Tailoring of Processing Parameters, Dendritic Microstructure, Si/Intermetallic Particles and Microhardness in As-cast and Heat-Treated Samples of Al7Si0.3Mg Alloy

Barbosa, Carolina R. ; Machado, Gabriel H. ; Azevedo, Hugo M. ; Rocha, Fernando S. ; Filho, José C. ; A. Pereira, Arielly ; Rocha, Otávio L.

Seoul: The Korean Institute of Metals and Materials

Buscando em bases de dados remotas. Favor aguardar.