skip to main content
Idioma:
Primo Search
Clear Search Box
Search in: Busca Geral
Busca Avançada
Busca por Índices

Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams

Wang, P. ; Liu, D.Y. ; Xu, C.

Applied energy, 2013-02, Vol.102, p.449-460 [Periódico revisado por pares]

Kidlington: Elsevier Ltd

Texto completo disponível

Citações Citado por
  • Título:
    Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams
  • Autor: Wang, P. ; Liu, D.Y. ; Xu, C.
  • Assuntos: Applied sciences ; Direct steam generation system ; Energy ; Energy. Thermal use of fuels ; Enhancing heat transfer ; Exact sciences and technology ; flow resistance ; foams ; Heat transfer ; mathematical models ; Metal foams ; Parabolic trough collector ; porosity ; steam ; temperature ; Theoretical studies. Data and constants. Metering ; thermal stress
  • É parte de: Applied energy, 2013-02, Vol.102, p.449-460
  • Notas: http://dx.doi.org/10.1016/j.apenergy.2012.07.026
    ObjectType-Article-1
    SourceType-Scholarly Journals-1
    ObjectType-Feature-2
    content type line 23
  • Descrição: ► Optimum thermo-hydraulic performance is obtained when H=0.25 (bottom). ► Optimum thermal performance is obtained when H=0.75 (top). ► Maximum circumferential temperature difference decreases about 45%. ► Layout, H effects on the thermal performance greatly, but φ effects on it slightly. ► Main methods and results can be extended to all solar concentrated receiver tube. The present numerical simulation investigates the effect of inserting metal foams in receiver tube of parabolic trough collector on heat transfer. The effects of layout (top/bottom), geometrical parameter (H), and porosity (φ) of metal foams on the flow resistant, heat transfer and thermo-hydraulic performance are analyzed. Optimum thermo-hydraulic performance considering the flow resistance increase is obtained when H=0.25 (bottom), Nu increases about 5–10 times with the increase of f 10–20 times and the PEC range from 1.4 to 3.2. Optimum thermal performance is obtained when H=0.75 (top), Nu increases about 10–12 times with the increase of f 400–700 times and the PEC range from 1.1 to 1.5. The maximum circumferential temperature difference on the out surface of receiver tube decreases about 45% which will greatly reduce the thermal stress. The result shows that for constant layout and φ, the H effects on the thermal performance greatly, but for constant layout and H, the φ effects on the thermal performance slightly. Moreover, the layout in view of no-uniform heat flux boundary affects the heat transfer significantly. These methods and results can be extended to the heat transfer enhancement of all the solar concentrated receivers.
  • Editor: Kidlington: Elsevier Ltd
  • Idioma: Inglês
Links
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.