skip to main content
Idioma:
Primo Search
Clear Search Box
Search in: Busca Geral
Busca Avançada
Busca por Índices

Direct conversion of CO2 to dimethyl ether in a fixed bed membrane reactor: Influence of membrane properties and process conditions

Poto, Serena ; Gallucci, Fausto ; Fernanda Neira d'Angelo, M.

Fuel (Guildford), 2021-10, Vol.302, p.121080, Article 121080 [Periódico revisado por pares]

Kidlington: Elsevier Ltd

Texto completo disponível

Citações Citado por
  • Título:
    Direct conversion of CO2 to dimethyl ether in a fixed bed membrane reactor: Influence of membrane properties and process conditions
  • Autor: Poto, Serena ; Gallucci, Fausto ; Fernanda Neira d'Angelo, M.
  • Assuntos: Carbon dioxide ; CO2 conversion ; Dimethyl ether ; Direct conversion ; DME production ; Feed composition ; Fixed beds ; Gas streams ; Inlet temperature ; Membrane permeability ; Membrane reactor ; Membrane reactors ; Membranes ; Optimization ; Packed beds ; Penetration ; Process parameters ; Reactors ; Selectivity ; Sweep gas ; Temperature gradients ; Thermodynamic equilibrium ; Water removal
  • É parte de: Fuel (Guildford), 2021-10, Vol.302, p.121080, Article 121080
  • Descrição: [Display omitted] •CO2 hydrogenation to dimethyl ether (DME) via a membrane reactor.•Development of a phenomenological membrane reactor model for DME synthesis.•Sweep gas fed in cocurrent mode to promote water and heat removal.•Effect of the membrane properties on the reactor performance.•High sweep gas flow rates promote the removal of water, enhancing DME synthesis. The direct hydrogenation of CO2 to dimethyl ether (DME) is a promising technology for CO2 valorisation. In this work, a 1D phenomenological reactor model is developed to evaluate and optimize the performance of a membrane reactor for this conversion, otherwise limited by thermodynamic equilibrium and temperature gradients. The co-current circulation of a sweep gas stream through the permeation zone promotes both water and heat removal from the reaction zone, thus increasing overall DME yield (from 44% to 64%). The membrane properties in terms of water permeability (i.e., 4·10−7 mol·Pa−1m−2s−1) and selectivity (i.e., 50 towards H2, 30 towards CO2 and CO, 10 towards methanol), for optimal reactor performance have been determined considering, for the first time, non-ideal separation and non-isothermal operation. Thus, this work sheds light into suitable membrane materials for this applications. Then, the non-isothermal performance of the membrane reactor was analysed as a function of the process parameters (i.e., the sweep gas to feed flow ratio, the gradient of total pressure across the membrane, the inlet temperature to the reaction and permeation zone and the feed composition). Owing to its ability to remove 96% of the water produced in this reaction, the proposed membrane reactor outperforms a conventional packed bed for the same application (i.e., with 36% and 46% improvement in CO2 conversion and DME yield, respectively). The results of this work demonstrate the potential of the membrane reactor to make the CO2 conversion to DME a feasible process.
  • Editor: Kidlington: Elsevier Ltd
  • Idioma: Inglês
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.